Tri-Fold Truck Bed Tonneau Cover for 2015-2024 Ford F-150 5.5FT Bed

[VEHICLE MODEL FIT] This hard tri-fold truck bed tonneau cover is compatible with 2015-2024 Ford F-150 vehicles with a 5.5FT bed. Please verify your bed length before ordering.

[PACKAGE INCLUDES] - 1x Bed Cover - 1x Seal Strip - 2x Front Clamp - 4x Rear Clamp - 1x Light - 2x Triangle Screw

[PLEASE NOTE] Before ordering, please confirm the model and year of your vehicle. The cab size does not matter as long as you have the right model and bed size.

[PRODUCT SPECIFICATIONS] - Style: Hard Tri-Fold - Size: 5.5FT - Finish: Black - Compatible with 2015-2024 Ford F-150 5.5FT Bed - Includes Seal Strip and LED Lamps

[INSTALLATION INSTRUCTIONS] 1. Clean the truck bed thoroughly before installation. 2. Stick the supplied front seal strip on the front bed rail by aligning with the outer edge. 3. Place the assembled cover on the bulkhead against the cab. 4. Slide the front clamp to the best position, clamp the interface under the metal bed rail point, and then use the triangle screw to rotate into the metal rod to fix the entire clamp. 5. Connect the provided rear clamps to the T-bar on the cover as shown in the figure. 6. Fix the rear clamp on the third cover as shown in the second cover. 7. Adjust the connection position of the rear clamp and T-bar according to the actual situation, open the cover and place it on the lathe, and push the rear clamp vertically to fix it to the rails on both sides of the lathe. 8. All clamps must be firmly in contact with the lip of the metal bed rail to ensure a firm cover. 9. After rear clamps have been latched securely, close/lock the tailgate and the cover cannot be opened from the outside.

[ALL-WEATHER PROTECTION] Protect your valuables against extreme weather conditions such as blistering sun, rainfall, hailing, or snow. The waterproof, snow-proof, and dirt-proof design keeps your truck bed dry and secure.

[IMPROVED FUEL ECONOMY] The sleek design of this hard tri-fold cover can reduce the drag caused by open truck beds, increasing fuel efficiency by more than 5%.

[EASY INSTALLATION] The product comes with a clamp-type fixture and all necessary components, including three adjustable clamp holes on both sides for precise mounting. Installation takes only a few minutes and is easy to assemble and disassemble.

[SECURE LOCKING] The cover is sealed by Velcro strips on both sides, and a latch and adjustable tension system at the tailgate keeps the cover tight and secure. When the tailgate is closed, the latch locks the waterproof cover in place, and the lock will only open automatically when the tailgate is opened and the rope is pulled down, improving safety.

[WARRANTY] We provide a one-year warranty. If you are not satisfied with your purchase for any reason, please contact us directly.

product information: